[j-nsp] Multiple ospf process on juniper EX

[Andrew Jones]

If you have to go down this road, the following is a good guide:

http://www.juniper.net/techpubs/software/junos/junos50/swconfig50-routing/html/instance-config5.html 

Note if you want to put the BGP default route in the other instance as well, you have to define the rib-group under edit protocols bgp

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Henri Khou
Sent: Tuesday, 14 September 2010 6:37 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Multiple ospf process on juniper EX

Hello,

I'm trying to find the best way to redistribute BGP default route to 2 independant organizations running OSPF with a different cost for each organization.
I am used to Cisco IOS where you can run 2 OSPF instance by specifying a process ID for every OSPF instance.
How can I do that under JunoS?

Thank you very much.

-- 
Henri KHOU
Administrateur Systèmes&   Réseaux
EHESS - CRI
54 Bd Raspail
75006 Paris
Tel: 01 49 54 24 79


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp