[j-nsp] Chassis Cluster - Strange behavior

[Fahad Khan]

Hi Folks,

I have been running SRX3600 In chassis cluster.

At the moment, I have disconnected control link and fabric link and
Secondary device is isolated from the network. But on primary device, the
cluster configs are still there. The network is working fine with primary
device but when i see chassis cluster status, i find this

SRX3600-A> show chassis cluster status
Cluster ID: 1
Node                  Priority          Status    Preempt  Manual failover

Redundancy group: 0 , Failover count: 1
    node0                   254         primary        no       no
    node1                   0           lost           n/a      n/a

Redundancy group: 1 , Failover count: 1
    node0                   0           primary        yes      no
    node1                   0           lost           n/a      n/a

why I am getting Node0 priority as 0 for red group 1, while i has been set
to 254???

have any body experienced?????

thanks and regards,


Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://pk.linkedin.com/in/muhammadfahadkhan