[j-nsp] MX80 ADV-R License

[Callum Barr]

Hi,

We have two of these boxes with the Advanced L3 Licenses, there is no need to install the license apparently, nor is there a way to generate the key on the juniper site.  The boxes work fine holding 2 full tables with vrf's without us installing the licenses, so I suspect that it is either installed when the box is shipped, or it is currently an honesty based license.

Cheers,

Callum Barr
Network Engineer
WorldxChange Communications

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Giuliano Cardozo Medalha
Sent: Thursday, September 23, 2010 12:55 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] MX80 ADV-R License

  People,

Does anyone know how to install the following license into the box:

1 x S-MX80-ADV-R    License to support full scale L3 route and L3 VPN on 
MX80

We have received a paper describing the license and a pen drive.

Does anyone bought a MX80-48T and have the license to install ?

How can we check if the license is correctly installed ?

Thanks a lot,

Giuliano
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp