[j-nsp] "Yellow led" and "Red led" alarms in Juniper

[Ido Szargel]

Hi Martin,

You have the "set chassis alarams" stanza where you can play with the chassis alarms levels (yellow/red/ignore)
The most useful thing I use is to turn off the red alarm about the MGMT interface not connected to anything on EX switches.

Regards,
Ido.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Martin T
Sent: Tuesday, April 05, 2011 2:26 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] "Yellow led" and "Red led" alarms in Juniper

As far as I know, all Juniper routers have "Yellow led" and "Red led"
indicators on "craft interface". Few examples:

http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfacea11.gif
http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfacea4.gif
http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfacea8.gif

..and one photo as well:

http://blog.gyron.net/wp-content/uploads/mx240_right_low.png

As I understand, yellow alarms are informative and red ones are critical. However, which alarms classify as "Yellow" and which ones classify as "Red"? Is there a possibility to change those thresholds?


regards,
martin
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp