[j-nsp] Multiple LAG Groups / Common Layer3 Routing

[Bill Blackford]

By "family bridge" you mean you've also added ae0, ae1, etc to a
bridge-domain and a routing-interface irb? I haven't tried this but I
would attempt to us "encapsulation ethernet-bridge" on the ae
interface.

Could you post your final working solution to the list or to me off-line?

Thanks,

-b

On Tue, Apr 5, 2011 at 6:34 AM, Paul Stewart <paul at paulstewart.org> wrote:
> Hi folks..
>
>
>
> Not sure if my subject line reads correctly or not.  MX platform running
> 10.0R3.10
>
>
>
> I have eight physical interfaces and want 4 LAG groups (2 interfaces X 4 LAG
> groups) - LACP Passive mode.
>
>
>
> All 4 LAG groups must belong to the same layer3 network.
>
>
>
> I have tried to create AE interfaces with "family bridge" however it rejects
> this but I know this should be something with bridge domains?
>
>
>
> Thanks,
>
>
>
> Paul
>
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Bill Blackford
Network Engineer

Logged into reality and abusing my sudo privileges.....