[j-nsp] Multiple LAG Groups / Common Layer3 Routing

[David Lockuan]

Hi Paul,

Yes, you need to create a bridge domains with respective vlan or vlan's.
Then you insert the aeX on the bridgde domain.

If you need to apply routing on this bridge, you need to create a irb
interface and configure in the bridge the routing-interface.

Best regards,



On Tue, Apr 5, 2011 at 8:34 AM, Paul Stewart <paul at paulstewart.org> wrote:

> Hi folks..
>
>
>
> Not sure if my subject line reads correctly or not.  MX platform running
> 10.0R3.10
>
>
>
> I have eight physical interfaces and want 4 LAG groups (2 interfaces X 4
> LAG
> groups) - LACP Passive mode.
>
>
>
> All 4 LAG groups must belong to the same layer3 network.
>
>
>
> I have tried to create AE interfaces with "family bridge" however it
> rejects
> this but I know this should be something with bridge domains?
>
>
>
> Thanks,
>
>
>
> Paul
>
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
David