[j-nsp] Notification Cease Subcode 6

[jacob miller]

Erdems,
Thanks.
The error frequency is sporadic with the bgp continuously flapping.
I will look at the config and post my findings.
Regards,Jacob Miller



--- On Mon, 4/18/11, erdems at gmail.com <erdems at gmail.com> wrote:

From: erdems at gmail.com <erdems at gmail.com>
Subject: Re: [j-nsp] Notification Cease Subcode 6
To: "jacob miller" <mmzinyi at yahoo.com>
Cc: juniper-nsp at puck.nether.net
Date: Monday, April 18, 2011, 5:08 PM


Hello Jacob,

 This message would be seen when your local interface for the BGP peering becomes unavailable after a configuration change. Examples could be change of the IP address, adding the interface in a vrf whereas the bgp is still configured directly under [edit protocols bgp] etc.


 I would recommend doing a show route table inet.0 MY_PEER_ADDRESS (assuming your bgp is for inet.0) and see what is wrong.

 Cheers,
 Erdem

On Mon, Apr 18, 2011 at 3:36 PM, jacob miller <mmzinyi at yahoo.com> wrote:

Hi,

Am getting the below error on my router with the BGP session with my provider.



Cant make heads or tails of it.





JUNIPER

%DAEMON-4: bgp_ifachange_group:XXX: NOTIFICATION sent to <<MY PEER IP ADDRESS> (External AS <<<MY AS NUMBER>>>): code 6 (Cease) subcode 6 (Other

Configuration Change), Reason: Interface change for the peer-group.



Any assistance in decoding the error will be highly appreciated.



Regards,

Jacob Miller

_______________________________________________

juniper-nsp mailing list juniper-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/juniper-nsp