[j-nsp] hardware DS1s

[Ryan Finnesey]

Ok so I am back to look at the SRX Series because I want to keep everything
within the same unit.  Does anyone know of any documents that compare the
Branch SRX Series to the J Series?

Cheers
Ryan


-----Original Message-----
From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net] 
Sent: Saturday, August 06, 2011 12:09 AM
To: Ryan Finnesey
Cc: <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] hardware DS1s

The SRX 210 is the only device that I am aware of that has an internal
ExpressCard slot for the CX111 3G modem.  All the other platforms use an
external bridge, so unfortunately you are out of luck here...

The J-Series do support internal ISDN BRI PIMs, however these must be
purchased separately.

HTHs.

Stefan Fouant
JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI
Technical Trainer, Juniper Networks
http://www.shortestpathfirst.net
http://www.twitter.com/sfouant

Sent from my iPad

On Aug 5, 2011, at 11:15 PM, "Ryan Finnesey" <rfinnesey at gmail.com> wrote:

> Is there an internal option for the J-Series for both the ISDN BRI and 
> 3G/4G wireless?
> 
> Cheers
> Ryan
> 
> 
> -----Original Message-----
> From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net]
> Sent: Friday, August 05, 2011 11:14 PM
> To: Ryan Finnesey
> Cc: <juniper-nsp at puck.nether.net>
> Subject: Re: [j-nsp] hardware DS1s
> 
> J-Series or branch SRX would fit the bill here as you can easily meet 
> your requirement with either platform.  You can get the CX111 cellular 
> bridge for 3G backup for these platforms.  Since you don't need 
> firewalling, SRX might be overkill however...
> 
> Stefan Fouant
> JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI
> Technical Trainer, Juniper Networks
> http://www.shortestpathfirst.net
> http://www.twitter.com/sfouant
> 
> Sent from my iPad
> 
> On Aug 5, 2011, at 10:28 PM, "Ryan Finnesey" <rfinnesey at gmail.com> wrote:
> 
>> What would the group recommend in terms of Juniper hardware that we 
>> can use at remote locations where we would install one or two DS1s?
>> This would be a TDM network witch we will run MPLS so no need for 
>> firewall.  If possible we would like to have the  same box to be able 
>> to support ISDN BRI and or 3G/4G wireless as a backup option.
>> 
>> 
>> 
>> Cheers
>> 
>> Ryan
>> 
>> 
>> 
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>