[j-nsp] hardware DS1s

[Stefan Fouant]

The SRX 210 is the only device that I am aware of that has an internal ExpressCard slot for the CX111 3G modem.  All the other platforms use an external bridge, so unfortunately you are out of luck here...

The J-Series do support internal ISDN BRI PIMs, however these must be purchased separately.

HTHs.

Stefan Fouant
JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI
Technical Trainer, Juniper Networks
http://www.shortestpathfirst.net
http://www.twitter.com/sfouant

Sent from my iPad

On Aug 5, 2011, at 11:15 PM, "Ryan Finnesey" <rfinnesey at gmail.com> wrote:

> Is there an internal option for the J-Series for both the ISDN BRI and 3G/4G
> wireless?
> 
> Cheers
> Ryan
> 
> 
> -----Original Message-----
> From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net] 
> Sent: Friday, August 05, 2011 11:14 PM
> To: Ryan Finnesey
> Cc: <juniper-nsp at puck.nether.net>
> Subject: Re: [j-nsp] hardware DS1s
> 
> J-Series or branch SRX would fit the bill here as you can easily meet your
> requirement with either platform.  You can get the CX111 cellular bridge for
> 3G backup for these platforms.  Since you don't need firewalling, SRX might
> be overkill however...
> 
> Stefan Fouant
> JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI
> Technical Trainer, Juniper Networks
> http://www.shortestpathfirst.net
> http://www.twitter.com/sfouant
> 
> Sent from my iPad
> 
> On Aug 5, 2011, at 10:28 PM, "Ryan Finnesey" <rfinnesey at gmail.com> wrote:
> 
>> What would the group recommend in terms of Juniper hardware that we 
>> can use at remote locations where we would install one or two DS1s?  
>> This would be a TDM network witch we will run MPLS so no need for 
>> firewall.  If possible we would like to have the  same box to be able 
>> to support ISDN BRI and or 3G/4G wireless as a backup option.
>> 
>> 
>> 
>> Cheers
>> 
>> Ryan
>> 
>> 
>> 
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>