[j-nsp] hardware DS1s

[Ryan Finnesey]

Is there an internal option for the J-Series for both the ISDN BRI and 3G/4G
wireless?

Cheers
Ryan


-----Original Message-----
From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net] 
Sent: Friday, August 05, 2011 11:14 PM
To: Ryan Finnesey
Cc: <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] hardware DS1s

J-Series or branch SRX would fit the bill here as you can easily meet your
requirement with either platform.  You can get the CX111 cellular bridge for
3G backup for these platforms.  Since you don't need firewalling, SRX might
be overkill however...

Stefan Fouant
JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI
Technical Trainer, Juniper Networks
http://www.shortestpathfirst.net
http://www.twitter.com/sfouant

Sent from my iPad

On Aug 5, 2011, at 10:28 PM, "Ryan Finnesey" <rfinnesey at gmail.com> wrote:

> What would the group recommend in terms of Juniper hardware that we 
> can use at remote locations where we would install one or two DS1s?  
> This would be a TDM network witch we will run MPLS so no need for 
> firewall.  If possible we would like to have the  same box to be able 
> to support ISDN BRI and or 3G/4G wireless as a backup option.
> 
> 
> 
> Cheers
> 
> Ryan
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp