[j-nsp] MX: bridge-domains and l2circuit

[Jonas Frey (Probe Networks)]

Hi Chris,

that does not work...

edge# show interfaces xe-1/0/0 
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
    family bridge {
        interface-mode trunk;
        vlan-id-list [ 20 30 40 ];
    }
}
unit 1 {
    encapsulation vlan-ccc;
    vlan-id 20;
}

If i do commit now, this fails as the vlan 20 is already used for the
bridge on unit 0. If i remove the vlan 20 from unit 0 then the vlan is
no longer member of the bridge (show bridge domain). But i need it to be
member of that bridge since that vlan goes out on other ports to local
switches.


edge# show bridge-domains testbridge  
domain-type bridge;
vlan-id 20;

What i need to do is to get the VLAN 20 working locally on the bridge
(various ports) as well as getting it connected to a somewhat pseudo
interface to attached it as a l2circuit.

-- 
Mit freundlichen Grüßen / Best regards, 
Jonas Frey

----------------------------------------------------------------
Probe Networks Jonas Frey        e-Mail: jf at probe-networks.de
Auf Strützberg 26                D-66663 Merzig
Tel: +(49) (0) 180 5959723*      Fax: +(49) (0) 180 5998480*
* (14 Ct./min Festnetz, Mobilfunk ggf. abweichende Preise) 
Internet: www.probe-networks.de  Hotline: 0800 1656531
----------------------------------------------------------------

Diese E-Mail enthaelt moeglicherweise vertrauliche und/oder rechtlich
geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind
oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte
sofort den Absender und vernichten Sie diese Mail. Das unerlaubte
Kopieren sowie die unbefugte Weitergabe dieser Mail ist strengstens
untersagt.

This e-mail may contain confidential and/or privileged information. 
If you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the contents of this
e-mail is strictly prohibited.

------------------------------------------


Am Donnerstag, den 18.08.2011, 16:22 +1000 schrieb Chris Kawchuk:
> You'll need to declare your xe- port with flexible-ethernet-services, so you can do per-unit encapsulations.
> 
> interfaces {
>     xe-1/0/0 {
>         vlan-tagging;
>         encapsulation flexible-ethernet-services;
>         unit 20 {
>             encapsulation vlan-ccc;
>             vlan-id 20;
>         }
>         unit 100 {
>             encapsulation vlan-bridge;
>             vlan-id 100;
>         }
>     }
> }
> 
> neighbor xxx {
>    interface xe-1/0/0.20 {
>        virtual-circuit-id 20;
>        ...
>        ...
>     }
> }
> 
> 
> 
> On 2011-08-18, at 4:03 PM, Jonas Frey (Probe Networks) wrote:
> 
> > Hello all,
> > 
> > i am trying to build a l2circuit on a MX. The problem is that the vlan
> > that needs to be included in the l2circuit comes via xe-1/0/0 which is
> > configured in bridge mode:
> > unit 0 {
> >    family bridge {
> >        interface-mode trunk;
> >        vlan-id-list [ 20 30 40 ];
> >    }
> > 
> > I need to build this l2circuit with vlan 20.
> > 
> > However when configuring the l2circuit i do not have a interface to use
> > as the bridge doesnt create any subinterface for the vlan.
> > 
> > neighbor xxx {
> >    interface ??? {
> >        virtual-circuit-id 20;
> > 
> > 
> > I cant configure any subinterface on xe-1/0/0 (like unit 1....) because
> > bridge mode prohibits that. 
> > 
> > How can i get this to work?
> > 
> > Best regards,
> > Jonas
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110818/753ed4c3/attachment.pgp>