[j-nsp] cfeb errors

kwarteng at myzipnet.com kwarteng at myzipnet.com
Wed Aug 24 02:53:17 EDT 2011


Hi,

My Juniper M10 router interfaces suddenly became unreachable. After getting
someone to the remote site and rebooting it, the interfaces were reachable
again. A close look at the logs points to issues with the cfeb just before
the loss. Am I losing my cfeb or I should be looking at the chassis? Do I
have to be looking at changing the router altogether?


The log

Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0c01020
data 0x02000010 status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0c01004
data 0x02000010 status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0c01004
data 0x07ffffff status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600420
data 0x02000010 status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600420
data 0xffffffff status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600820
data 0x02000010 status 4
Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600820
data 0xffffffff status 4
Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600c20
data 0x02000010 status 4
Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600c20
data 0xffffffff status 4
Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0601020
data 0x00000000 status 4
Aug 24 02:36:23  xxx cfeb IA_RPKT(0, 0): hardware error, invalid db
pointer0x0, ia_rpkt_coalesce
Aug 24 02:36:30  xxx last message repeated 69 times
Aug 24 02:36:30  xxx cfeb IA_PCIIF(0): IA Bus 0 RXIF error,
ia_pciif_internal_error_check
Aug 24 02:36:30  xxx cfeb IA_RXIF(0, 0): Error Symbol: CRC Error
Aug 24 02:36:31  xxx cfeb IA_PCIIF(0): IA Bus 0 RXIF error,
ia_pciif_internal_error_check
Aug 24 02:36:51  xxx /kernel:
Aug 24 02:36:51  xxx /kernel: so-0/1/0.0 down: no keepalive.
Aug 24 02:36:51  xxx mib2d[1383]: SNMP_TRAP_LINK_DOWN: ifIndex 520,
ifAdminStatus up(1), ifOperStatus down(2), ifName so-0/1/0
Aug 24 02:36:51  xxx rpd[1354]: bgp_ifachange_group:6251: NOTIFICATION sent
to a.a.a.a (External AS 6453): code 6 (Cease) subcode 6 (Other Configuration
Change), Reason: Interface change for the peer-group
Aug 24 02:37:01  xxx rpd[1354]: RPD_OSPF_NBRDOWN: OSPF neighbor b.b.b.b
(realm ospf-v2 ge-0/0/0.0 area 0.0.0.0) state changed from Full to Down due
to InActiveTimer (event reason: neighbor was inactive and declared dead)
Aug 24 02:37:52  xxx rpd[1354]: bgp_hold_timeout:3646: NOTIFICATION sent to
c.c.c.c (Internal AS 36961): code 4 (Hold Timer Expired Error), Reason:
holdtime expired for c.c.c.c (Internal AS 36961), socket buffer sndcc: 100
rcvcc: 0 TCP state: 4, snd_una: 2293409040 snd_nxt: 2293409121 snd_wnd:
16270 rcv_nxt: 1113804713 rcv_adv: 1113821097, hold timer 0


Emmanuel






More information about the juniper-nsp mailing list