[j-nsp] cfeb errors

[Pasvorn Boonmark]

The error looks like the cfeb went bad.

I think it was trying to read stats off the ASIC but failed.

Did you try to reset it?

-Pasvorn



On 8/23/11, kwarteng at myzipnet.com <kwarteng at myzipnet.com> wrote:
> Hi,
>
> My Juniper M10 router interfaces suddenly became unreachable. After getting
> someone to the remote site and rebooting it, the interfaces were reachable
> again. A close look at the logs points to issues with the cfeb just before
> the loss. Am I losing my cfeb or I should be looking at the chassis? Do I
> have to be looking at changing the router altogether?
>
>
> The log
>
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0c01020
> data 0x02000010 status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0c01004
> data 0x02000010 status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0c01004
> data 0x07ffffff status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600420
> data 0x02000010 status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600420
> data 0xffffffff status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600820
> data 0x02000010 status 4
> Aug 24 02:36:22  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600820
> data 0xffffffff status 4
> Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO RD timeout addr 0xf0600c20
> data 0x02000010 status 4
> Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0600c20
> data 0xffffffff status 4
> Aug 24 02:36:23  xxx cfeb IA_PIO(0, 0): REG PIO WR timeout addr 0xf0601020
> data 0x00000000 status 4
> Aug 24 02:36:23  xxx cfeb IA_RPKT(0, 0): hardware error, invalid db
> pointer0x0, ia_rpkt_coalesce
> Aug 24 02:36:30  xxx last message repeated 69 times
> Aug 24 02:36:30  xxx cfeb IA_PCIIF(0): IA Bus 0 RXIF error,
> ia_pciif_internal_error_check
> Aug 24 02:36:30  xxx cfeb IA_RXIF(0, 0): Error Symbol: CRC Error
> Aug 24 02:36:31  xxx cfeb IA_PCIIF(0): IA Bus 0 RXIF error,
> ia_pciif_internal_error_check
> Aug 24 02:36:51  xxx /kernel:
> Aug 24 02:36:51  xxx /kernel: so-0/1/0.0 down: no keepalive.
> Aug 24 02:36:51  xxx mib2d[1383]: SNMP_TRAP_LINK_DOWN: ifIndex 520,
> ifAdminStatus up(1), ifOperStatus down(2), ifName so-0/1/0
> Aug 24 02:36:51  xxx rpd[1354]: bgp_ifachange_group:6251: NOTIFICATION sent
> to a.a.a.a (External AS 6453): code 6 (Cease) subcode 6 (Other Configuration
> Change), Reason: Interface change for the peer-group
> Aug 24 02:37:01  xxx rpd[1354]: RPD_OSPF_NBRDOWN: OSPF neighbor b.b.b.b
> (realm ospf-v2 ge-0/0/0.0 area 0.0.0.0) state changed from Full to Down due
> to InActiveTimer (event reason: neighbor was inactive and declared dead)
> Aug 24 02:37:52  xxx rpd[1354]: bgp_hold_timeout:3646: NOTIFICATION sent to
> c.c.c.c (Internal AS 36961): code 4 (Hold Timer Expired Error), Reason:
> holdtime expired for c.c.c.c (Internal AS 36961), socket buffer sndcc: 100
> rcvcc: 0 TCP state: 4, snd_una: 2293409040 snd_nxt: 2293409121 snd_wnd:
> 16270 rcv_nxt: 1113804713 rcv_adv: 1113821097, hold timer 0
>
>
> Emmanuel
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from my mobile device