[j-nsp] CoS error

STEVEN ccie1919 at 163.com
Mon Dec 5 23:39:39 EST 2011


IQ2 PIC supports only one "strict-high" or "high" or "medium-high".

Please modify your configurtion, 




STEVEN via foxmail

Sender: Mark Tinka
Date: 2011年12月6日(星期二) 下午12:26
To: juniper-nsp
Subject: Re: [j-nsp] CoS error
On Sunday, December 04, 2011 07:56:01 PM Muhammad Adnan 
Mohsin wrote:

> Hi Experts,
> I am getting the following error while applying the CoS
> configuration.
> 
> [edit class-of-service interfaces]
> 
>   'ge-1/0/2'
> 
>     More than one scheduler is configured as
> "strict-high" or "high" or "medium-high" in sch_mp-core
> for ge-1/0/2. Ifd ge-1/0/2 supports only one scheduler
> with "strict-high" or "high" or "medium-high".
> 
> error: configuration check-out failed
> 
> It's a M320 router with a 8 port IQ2 PIC. The PIC details
> are below.

We hit a similar issue in the past, on an M320 with an IQ2 
10Gbps PIC as well.

Basically, you cannot configure more than one 'strict-high' 
or 'high' scheduler for an interface. The router will commit 
only one of each for only one interface.

In a way, it sort of makes sense, since there's no point in 
scheduling traffic with priority on multiple queues on the 
same interface. It would defeat the purpose :-). Also, the 
only difference between 'high' and 'strict-high' is that 
'high' respects the 'transmit-rate', while 'strict-high' 
does not.

I can't recall whether the behaviour was different on the 
MX, but we decided to go with the least common denominator 
so we can have configuration and behaviour consistency 
across the entire backbone.

Cheers,

Mark.

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list