[j-nsp] MVPN over Juniper PE and Cisco P

[Muhd Safwan]

Hi,


I'm working on requirement to enable MVPN over Juniper PE and Cisco P.


Currently all PE's are peering with Cisco RR for IPv4 and VPNv4.


I came across this document
http://www.juniper.net/techpubs/en_US/junos9.6/information-products/topic-collections/feature-guide/multicast-vpn-mbgp-extranets-configuring-solutions.html#


But there's a part that i'm not sure which is the "inet-mvpn signaling" and
i'm not sure what cisco is using to match the configuration. We also don't
have any Multiservice PIC or Adaptive Service PIC.


Have anybody tried this setup before and i would like some tips and info to
finish this requirement.


The overview setup is like this:-



CE1(J)----------PE1(J)------------------P1(C)-------------P2(C)---------------------
PE2(J)-------------CE2(J)



Thanks


Safwan