[j-nsp] Best practices for ex4200 EoMPLS/CCC

Humair Ali humair.s.ali at gmail.com
Mon Feb 7 17:11:18 EST 2011


Hi Keegan

this is actually the case, this is one of the limitations of CCC setup, is
that it requires it's own LSP for each CCC connection ,
this is the main difference with the l2circuit/l2vpnwhere u can us the same
LSP for multiple traffic





On 7 February 2011 21:03, Keegan Holley <keegan.holley at sungard.com> wrote:

> Greetings all,
>
> I'm playing around with  CCC on EX4200's using MX/M's a P routers and I was
> just curious if there are any best practices for this.  Juniper's website
> was cryptic as always.  One of the things I noticed was that each
> cross-connect reqires it'uires it's own LSP.  Just curious if this was
> actually the
> case or if I'm configuring something wrong.
>
> Keegan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Humair


More information about the juniper-nsp mailing list