[j-nsp] Best practices for ex4200 EoMPLS/CCC

[Keegan Holley]

Thanks. Is there an upper limit to how many LSP's the 4200 can support?
 Also, can a cross connect be attached to a LSP that is forwarding vpn
traffic?


On Mon, Feb 7, 2011 at 5:11 PM, Humair Ali <humair.s.ali at gmail.com> wrote:

> Hi Keegan
>
> this is actually the case, this is one of the limitations of CCC setup, is
> that it requires it's own LSP for each CCC connection ,
> this is the main difference with the l2circuit/l2vpnwhere u can us the same
> LSP for multiple traffic
>
>
>
>
>
> On 7 February 2011 21:03, Keegan Holley <keegan.holley at sungard.com> wrote:
>
>> Greetings all,
>>
>> I'm playing around with  CCC on EX4200's using MX/M's a P routers and I
>> was
>> just curious if there are any best practices for this.  Juniper's website
>> was cryptic as always.  One of the things I noticed was that each
>> cross-connect reqires it'uires it's own LSP.  Just curious if this was
>> actually the
>>
>> case or if I'm configuring something wrong.
>>
>> Keegan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
>
> --
> Humair
>
>