[j-nsp] general guidelines for installing JUNOS to RE, where HDD and CF are blank

Jonas Frey (Probe Networks) jf at probe-networks.de
Fri Feb 11 05:28:44 EST 2011


Ohh...well there are so many models and partnumbers of these i guess its
hard to test all of them. Maybe we should write down working partnumbers
on the cluepon wiki. The "blue" SanDisk ones are atleast the same as
juniper used time ago. After that they switched to simple tech and
probably others (atleast on T320/T640 RE-1600/RE-2000).


Am Freitag, den 11.02.2011, 12:14 +0200 schrieb Pekka Savola:
> On Fri, 11 Feb 2011, Jonas Frey (Probe Networks) wrote:
> > I doubt the PCMCIA Adapter is the problem. I guess its the CF....maybe
> > its too new. I know about serveral newer CF cards not working in RE2/3.
> > Try to get a regular SanDisk 1GB+ CF. (not the Ultra/Extreme models).
> > This should work.
> 
> Thanks for providing the soapbox ;-).  Extreme model worked for us on 
> RE3.0 fine, except that its performance is too good.  Juniper RE CPU 
> gets overloaded when writing an image on it and it drops BGP sessions 
> etc. This is not a bug according to JTAC. Be aware if you ever need to 
> do CF flashing on live equipment :P
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110211/559e27b5/attachment.pgp>


More information about the juniper-nsp mailing list