[j-nsp] Re-write rule for GRE interface

[Diogo Montagner]

Hi Shiva,

could you please post the command "show class-of-service interface
gr-x/y/z.abc" ?

Regards
./diogo -montagner



On Fri, Jan 14, 2011 at 10:59 PM, Shiva Shankar <shankarks at gmail.com> wrote:
> Hi All, I'm trying to mark the DSCP value on a GRE packet, so that the telco
> can handle as per our contracted services. I've tried
> 'copy-tos-to-outer-ip-header', but it doesn't work as the inner datagram of
> a GRE packet is a MPLS datagram.
> Here, how it looks on the wire (found using packet capture)
>
> Frame>>>Ethernet II header >>> IP packet >>> GRE header >>> MPLS header >>>
> origianl IP packet with data
>
> A Layer 3 VPN packet while leaving the local PE to remote PE, uses GRE
> interface which has LDP enabled.
>
> I've tried even applying dscp rewrite rules, but it doesn't work. Any ideas.
>
> Thanks
> Shiva
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>