[j-nsp] FW: SRX Debug Commands.

[Ivan Ivanov]

Hello,

check out this KB

http://kb.juniper.net/InfoCenter/index?page=content&id=KB16110


HTH,


On Tue, Jan 18, 2011 at 12:44, Braham Pal Singh <
brahampal.singh at ericsson.com> wrote:

>  Hi All,
>
> We recently have SRX 3600 In the network and In the Earlier Netscreen
> Firewall there was a very Good utlity to Capture and debug comand ( debug
> flow basic , get dbuff stream etc ) to see the movement of the packet. Does
> some one has idea as how this function has been transferred to SRX since it
> is Junos Based Firewall.
>
> Thanks in advance....
>
> Best Regards
>
> Brahampal singh
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Best Regards!

Ivan Ivanov