[j-nsp] FW: SRX Debug Commands.

[Braham Pal Singh]

Hi Ivan

Thanks for the Prompt help. This is Quite Useful.

Best Regards

Brahampal Singh



________________________________
From: Ivan Ivanov [mailto:ivanov.ivan at gmail.com]
Sent: Tuesday, January 18, 2011 4:49 PM
To: Braham Pal Singh
Cc: juniper-nsp-bounces at puck.nether.net; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] FW: SRX Debug Commands.

Hello,

check out this KB

http://kb.juniper.net/InfoCenter/index?page=content&id=KB16110


HTH,


On Tue, Jan 18, 2011 at 12:44, Braham Pal Singh <brahampal.singh at ericsson.com<mailto:brahampal.singh at ericsson.com>> wrote:
 Hi All,

We recently have SRX 3600 In the network and In the Earlier Netscreen Firewall there was a very Good utlity to Capture and debug comand ( debug flow basic , get dbuff stream etc ) to see the movement of the packet. Does some one has idea as how this function has been transferred to SRX since it is Junos Based Firewall.

Thanks in advance....

Best Regards

Brahampal singh


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp



--
Best Regards!

Ivan Ivanov