[j-nsp] Taking full BGP table and filtering on SRX210

[Stacy W. Smith]

On Jan 25, 2011, at 8:16 AM, Mark Kamichoff wrote:
> 
> BGP routes on Junos are stored in the adjacency-rib-in table (show route
> receive-protocol bgp $peer) even if you filter them from being installed
> into inet.0 or inet6.0.

You are correct that this is the default behavior of JUNOS. You can disable this with 'keep none'. I suspect this would be necessary to have any hope of the OP's objective of dealing with a full feed on an SRX210.

--Stacy