[j-nsp] ATM2 pic connected to another M7i cannot get ISIS adjatency ; (
Stefan Fouant
sfouant at shortestpathfirst.net
Thu Jul 7 12:22:56 EDT 2011
You have both sides doing clocking internal?
Also, what is the config under [protocols isis]?
Stefan Fouant
GPG Key ID: 0xB4C956EC
Sent from my HTC EVO.
----- Reply message -----
From: "Xavier Beaudouin" <kiwi at oav.net>
Date: Thu, Jul 7, 2011 10:51 am
Subject: [j-nsp] ATM2 pic connected to another M7i cannot get ISIS adjatency ; (
To: <juniper-nsp at puck.nether.net>
Hi there,
I have 2 M7i with pic :
PIC 3 REV 08 750-005724 CN5430 2x OC-3 ATM-II IQ, MM
Since I don't use ATM, I wanted to use this as interrouter connection using :
jun-m7i-1 at-0/3/0 <-> jun-m7i-2 at-0/3/0
jun-m7i-1 at-0/3/1 <-> jun-m7i-2 at-0/3/1
I finaly found a way to make the communication (ipv4) between the routers, but it doesn't seems to work with ISIS.
Here is jun-m7i-1 base configuration :
interfaces {
at-0/3/0 {
description "To jun-m7i-2_at-0/3/0";
mtu 9192;
clocking internal;
encapsulation atm-pvc;
atm-options {
pic-type atm2;
vpi 1;
}
unit 0 {
encapsulation atm-snap;
vci 1.100;
oam-period 3;
oam-liveness {
up-count 3;
down-count 3;
}
family inet {
address xx.xx.xx.125/30;
}
family iso;
}
}
at-0/3/1 {
description "To jun-m7i-2_at-0/3/1";
mtu 9192;
clocking internal;
encapsulation atm-pvc;
atm-options {
pic-type atm2;
vpi 1;
}
unit 0 {
vci 1.100;
family inet {
address xx.xx.xx.121/30;
}
family iso;
}
}
lo0 {
description Loopback;
unit 0 {
family inet {
no-redirects;
primary;
address xx.xx.xx.1/32 {
primary;
preferred;
}
}
family iso {
address 49.0001.0xxx.xxxx.xxx1.00;
}
}
}
}
On jun-m7i-2 :
interfaces {
at-0/3/0 {
description "To jun-m7i-1_at-0/3/0";
mtu 9192;
clocking internal;
encapsulation atm-pvc;
atm-options {
pic-type atm2;
vpi 1;
}
unit 0 {
encapsulation atm-snap;
vci 1.100;
oam-period 3;
oam-liveness {
up-count 3;
down-count 3;
}
family inet {
address xx.xx.xx.126/30;
}
family iso;
}
}
at-0/3/1 {
description "To jun-m7i-1_at-0/3/1";
mtu 9192;
clocking internal;
encapsulation atm-pvc;
atm-options {
pic-type atm2;
vpi 1;
}
unit 0 {
encapsulation atm-snap;
vci 1.100;
family inet {
address xx.xx.xx.122/30;
}
family iso;
}
}
lo0 {
description Loopback;
unit 0 {
family inet {
no-redirects;
primary;
address xx.xx.xx.xx/32 {
primary;
preferred;
}
}
family iso {
address 49.0001.0xxx.xxxx.xxx2.00;
}
}
}
}
show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric
at-0/3/0.0 3 0x1 Point to Point Point to Point 10/10
at-0/3/1.0 3 0x1 Point to Point Point to Point 10/10
lo0.0 0 0x1 Passive Passive 0/0
Any clues, ideas ?
Kind regards,
Xavier
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list