[j-nsp] Juniper BRAS E120

[Miquel van Smoorenburg]

On Tue, 2011-07-05 at 15:59 -0300, Thiago Lizardo wrote:
> Hi Muhammad,
> 
> First of all you need to create "rate limits"(2Mb, 4Mb, etc). After, you need to create policies for each bandwidth profile. Inside each "policy-list" configuration you will put the rate limit that was created.
> 

You probably don't want to do that. Ratelimiters are not really suited
for IP traffic. You'll make your customers unhappy. You want to use
shaping instead. Basically define scheduler-profiles that you then
include in qos-profiles.

But you want to do it generically, using qos-parameters of which you set
the value through a radius attribute.

But see also my other posting.

Mike.