[j-nsp] JUNOS 10.4R4.5 on an SRX650

Daniel M Daloia Jr daniel.daloia at yahoo.com
Fri Jul 29 09:47:30 EDT 2011



Thanks for the heads up. I have run into issues with link-speed 10.4R1.9 and clustering on another set of 650s. Make sure both SRX and other end are set to auto or the SRX will just stop forwarding traffic out of the interface randomly and will not fail. Hope Juniper can get around link-speed with clusters soon.

Thanks!





________________________________
From: Ralph Rye <rrye at norgetek.com>
To: Daniel M Daloia Jr <daniel.daloia at yahoo.com>; "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Thursday, July 28, 2011 5:03 PM
Subject: RE: [j-nsp] JUNOS 10.4R4.5 on an SRX650

The only issue I have come across is unsupported command/feature causing the config not load, and also preventing the startup of the management daemon.  In the case I worked on it was the link-speed option tied to a RETH interface on a cluster.  It doesn't appear to happen every time.  I tried to reproduce on a SRX 210 cluster and I could get it to fail the same way.

If your SRXs come up and stay in a hold state and if the results of many operation commands result in "error: Could not connect to node0 : No route to host" type of error you are probably experiencing the issue.   JTAC fixed the issue pretty quickly by starting a shell and running the  following commands:

% cd /var/run/db
% mgd -i

Which produced an error about link speed mismatch between the RETH and the GE interface.

He then edited the configuration by deleting the option from the RETH interface and committed.  After a reboot the SRX can back online and became a member of the cluster.


Ralph




-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Daniel M Daloia Jr
Sent: Thursday, July 28, 2011 9:57 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] JUNOS 10.4R4.5 on an SRX650

  Hey Folks,

Anyone using the current recommended release 10.4R4.5 on the SRX650 series? We have a pretty simple setup with clustering, IDP, BGP, OSPF. Just looking for any got-chas!

Thanks!
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list