[j-nsp] Ipv6 over Aggregated Sonet

Dusan Avbreht d.avbreht at gmail.com
Wed Jun 8 11:34:09 EDT 2011


Hi Mario,

Version 10.4 till revision R4 have problem with IPv6 next-hope reachability.
Tray with 10.4R4.5 and it works!

Regards,
Dusan

On Wed, Jun 8, 2011 at 3:42 PM, Mario Andres Rueda Jaimes <
maeve2009 at gmail.com> wrote:

> Hi All
>
> We are trying to configure IPv6 addressing, between a M20 and M160
> running junos 10.4 and 9.6 respectively over aggregated sonet interface,
> the main issue is that is-is (V6) adjacency don't comes up, the two Ip
> addresses are reachable each other via ICMP, but the neighbor doesn't.
> Instead,  ipv4 is-is runs ok.
>
> I think that the problem is that  Agreggate Sonnet interfaces doesn't
> have any  mac-address associated by default. The official documentation
> I've been read says that no problem is  espected activating ipv6 over
> aggregated sonnet interfaces
>
>  Anybody has any kind of suggestions about this case ?
>
>
> Thanks
>
> Mario Rueda
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
________________________________
Dušan Avbreht
Professional Service Consultant

AVDUS d.o.o.

Mobile: +386 41 340546
E: d.avbreht at gmail.com
E: dusan at avdus.net


More information about the juniper-nsp mailing list