[j-nsp] difference between "halt" and "power-off"

Sebastian Wiesinger juniper-nsp at ml.karotte.org
Thu Jun 16 08:53:36 EDT 2011


* Martin T <m4rtntns at gmail.com> [2011-06-15 00:30]:
> What is the difference between "request system halt" and "request
> system power-off" under JUNOS? Is there a possibility to completely
> turn off the router remotely(for example in case of Cisco it's
> impossible)?

On MX "power-off" turns off the RE(s) but leaves the chassis powered.
"halt" does the same but you can reboot the RE(s) via console.

Regards

Sebastian

-- 
New GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE)
Old GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant


More information about the juniper-nsp mailing list