[j-nsp] RE : MX80 MIC won't come online

[Serge Vautour]

Hello,

I suppose I didn't include what was obvious to me. The Junos version is 10.2S6. 
The MIC is a 20x1G (MIC-3D-20GE-SFP). We have a few other MX80s in Prod all 
running the same Junos version and using the same MIC. The MIC does not show up 
under "show chassis hardware". The lab box we tried happened to be on 10.4R4. We 
tried is to prove that the MIC itself was good, not to prove the software.

Thanks,
Serge



----- Original Message ----
From: Stéphane Grosjean <Stephane.Grosjean at telindus.fr>
To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Tue, June 21, 2011 5:27:08 AM
Subject: [j-nsp] RE : MX80 MIC won't come online

Hello,


I assume you have checked your JunOS version? Please give us what MIC it is and 
JunOS you're running.


Kind Regards,


Stephane

>Hello,
>
>We're trying to turn up a new MIC in an MX80. The MIC has been inserted in slot
>1 and the box sees it:
>
>user at box> show chassis fpc pic-status
>Slot 0   Online
>  PIC 0  Online       4x 10GE XFP
>Slot 1   Online
>  PIC 0  Online       10x 1GE(LAN) SFP
>  PIC 1  Online       10x 1GE(LAN) SFP
>  PIC 2  Offline
>  PIC 3  Offline
>
>There are also log entries for FRU insertion. When we try to online to card we
>get:
>
>user at box> request chassis mic fpc-slot 1 mic-slot 1 online
>FPC 1, MIC 1 is empty
>
>We tried the new MIC in another MX80 and it comes up fine. Any suggestions 
other
>than a bad slot?
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp