[j-nsp] RE : MX80 MIC won't come online

[Chris Evans]

Jtac case opened?
On Jun 21, 2011 7:44 AM, "Serge Vautour" <sergevautour at yahoo.ca> wrote:
> Hello,
>
> I suppose I didn't include what was obvious to me. The Junos version is
10.2S6.
> The MIC is a 20x1G (MIC-3D-20GE-SFP). We have a few other MX80s in Prod
all
> running the same Junos version and using the same MIC. The MIC does not
show up
> under "show chassis hardware". The lab box we tried happened to be on
10.4R4. We
> tried is to prove that the MIC itself was good, not to prove the software.
>
> Thanks,
> Serge
>
>
>
> ----- Original Message ----
> From: Stéphane Grosjean <Stephane.Grosjean at telindus.fr>
> To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
> Sent: Tue, June 21, 2011 5:27:08 AM
> Subject: [j-nsp] RE : MX80 MIC won't come online
>
> Hello,
>
>
> I assume you have checked your JunOS version? Please give us what MIC it
is and
> JunOS you're running.
>
>
> Kind Regards,
>
>
> Stephane
>
>>Hello,
>>
>>We're trying to turn up a new MIC in an MX80. The MIC has been inserted in
slot
>>1 and the box sees it:
>>
>>user at box> show chassis fpc pic-status
>>Slot 0 Online
>> PIC 0 Online 4x 10GE XFP
>>Slot 1 Online
>> PIC 0 Online 10x 1GE(LAN) SFP
>> PIC 1 Online 10x 1GE(LAN) SFP
>> PIC 2 Offline
>> PIC 3 Offline
>>
>>There are also log entries for FRU insertion. When we try to online to
card we
>>get:
>>
>>user at box> request chassis mic fpc-slot 1 mic-slot 1 online
>>FPC 1, MIC 1 is empty
>>
>>We tried the new MIC in another MX80 and it comes up fine. Any suggestions

> other
>>than a bad slot?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp