[j-nsp] RE : MX80 MIC won't come online

[Serge Vautour]

We have support. I just find a often get a better and quicker response from this 
list. 


FYI: We have gotten this to work. We had to push the button on the MIC using a 
paper clip to reset it. We were then able online the PIC with the software 
command. Must be a bug!

Serge



----- Original Message ----
From: Chris Evans <chrisccnpspam2 at gmail.com>
To: Serge Vautour <serge at nbnet.nb.ca>
Cc: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Tue, June 21, 2011 10:37:53 AM
Subject: Re: [j-nsp] RE : MX80 MIC won't come online

Just making sure. A lot of folks rely on others in forums vs the vendor. We
pay them for support and how will they know of problems when they aren't
reported.
On Jun 21, 2011 8:06 AM, "Serge Vautour" <sergevautour at yahoo.ca> wrote:
> LOL - Yes :)
>
> Serge
>
>
>
> ----- Original Message ----
> From: Chris Evans <chrisccnpspam2 at gmail.com>
> To: Serge Vautour <serge at nbnet.nb.ca>
> Cc: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
> Sent: Tue, June 21, 2011 8:51:55 AM
> Subject: Re: [j-nsp] RE : MX80 MIC won't come online
>
> Jtac case opened?
> On Jun 21, 2011 7:44 AM, "Serge Vautour" <sergevautour at yahoo.ca> wrote:
>> Hello,
>>
>> I suppose I didn't include what was obvious to me. The Junos version is
> 10.2S6.
>> The MIC is a 20x1G (MIC-3D-20GE-SFP). We have a few other MX80s in Prod
> all
>> running the same Junos version and using the same MIC. The MIC does not
> show up
>> under "show chassis hardware". The lab box we tried happened to be on
> 10.4R4. We
>> tried is to prove that the MIC itself was good, not to prove the
software.
>>
>> Thanks,
>> Serge
>>
>>
>>
>> ----- Original Message ----
>> From: Stéphane Grosjean <Stephane.Grosjean at telindus.fr>
>> To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
>> Sent: Tue, June 21, 2011 5:27:08 AM
>> Subject: [j-nsp] RE : MX80 MIC won't come online
>>
>> Hello,
>>
>>
>> I assume you have checked your JunOS version? Please give us what MIC it
> is and
>> JunOS you're running.
>>
>>
>> Kind Regards,
>>
>>
>> Stephane
>>
>>>Hello,
>>>
>>>We're trying to turn up a new MIC in an MX80. The MIC has been inserted
in
> slot
>>>1 and the box sees it:
>>>
>>>user at box> show chassis fpc pic-status
>>>Slot 0 Online
>>> PIC 0 Online 4x 10GE XFP
>>>Slot 1 Online
>>> PIC 0 Online 10x 1GE(LAN) SFP
>>> PIC 1 Online 10x 1GE(LAN) SFP
>>> PIC 2 Offline
>>> PIC 3 Offline
>>>
>>>There are also log entries for FRU insertion. When we try to online to
> card we
>>>get:
>>>
>>>user at box> request chassis mic fpc-slot 1 mic-slot 1 online
>>>FPC 1, MIC 1 is empty
>>>
>>>We tried the new MIC in another MX80 and it comes up fine. Any
suggestions
>
>> other
>>>than a bad slot?
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp