[j-nsp] BFD timers for OSPF - MX80 - 10.3R2.11

[Egor Zimin]

Hello, David

It looks like BFD implementation in MX80 is not distributed. At this
moment I have a case in JTAC. The case is opened yet, however, it
_looks_like_ bfd is not distributed.
Probably because of this BFD echomode is not supported. And using 30ms
timers for BFD ControlPackets can be not so easy task for RE's CPU.

Because of this I don't see much sense to use BFD on MX80 at this moment.

2011/3/3 David Ball <davidtball at gmail.com>:
> MX80s running 10.3R2.11
>
>  For those of you using BFD for OSPF, how low have you been able to
> set your minimum-interval timer?  I have a pair of MX80s connected via
> XFPs and 1m patch cables and with my hellos set to 30ms and multiplier
> set to 3, I'm seeing failures.  I haven't disabled distributed ppm.
> Moving to 50ms hellos seems to settle things down.  The reason I'm
> wondering why I can't get away with lower timers is because when
> Juniper proof-of-concepted (yeah, that's a verb) Trio for us (albeit
> using MX960s), they used 15ms hellos with a multiplier of 3.
>
> Mar  3 10:06:06  router bfdd[1129]: BFDD_TRAP_STATE_DOWN: local
> discriminator: 1, new state: down
> Mar  3 10:06:06  router rpd[1257]: RPD_OSPF_NBRDOWN: OSPF neighbor
> 172.16.1.22 (realm ospf-v2 xe-0/0/2.0 area 0.0.0.0) state changed from
> Full to Down due to InActiveTimer (event reason: BFD session timed out
> and neighbor was declared dead)
>
>
> me at router> show configuration groups bfd-defaults-core-ospf
> protocols {
>    ospf {
>        area 0.0.0.0 {
>            interface <*> {
>                bfd-liveness-detection {
>                    version automatic;
>                    minimum-interval 30;
>                    multiplier 3;
>                    full-neighbors-only;
>                }
>            }
>        }
>    }
> }
>
> me at router> show configuration protocols ospf area 0.0.0.0
> interface lo0.0 {
>    passive;
> }
> interface xe-0/0/2.0 {
>    apply-groups bfd-defaults-core-ospf;
>    node-link-protection;
> }
> interface xe-0/0/3.0 {
>    apply-groups bfd-defaults-core-ospf;
>    node-link-protection;
> }
>
>
> David
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Best regards,
Egor Zimin