[j-nsp] SRX650 Clustering Issue

Walaa Abdel razzak walaaez at bmc.com.sa
Sat Mar 5 09:17:18 EST 2011


Hi Scott

 

The old configuration was test config (very simple) like hostname,
aggregate ethernet,.....as its fresh FW. After enabling clusterign using
the standard command set chassis clustering......and reboot, we got the
following:

 

{hold:node0}

root at -FW1> edit 

warning: Clustering enabled; using private edit

error: shared configuration database modified

Please temporarily use 'configure shared' to commit

outstanding changes in the shared database, exit,

and return to configuration mode using 'configure'

 

when I issue most commands I got the following:

 

{hold:node0}

root at -FW1> show version 

error: Could not connect to node0 : No route to host

 

The JUNOS version is 10.3.

 

Also here is a sample of Chassisd log:

 

Mar  5 19:32:49 completed chassis state from ddl

Mar  5 19:32:49 ch_set_non_stop_forwarding_cfg:Setting
non-stop-forwarding to Disabled, source DDL

Mar  5 19:32:49 ch_do_multichassis_overrides:Setting multichassis
replication to Disabled

Mar  5 19:32:49 config_do_overrides: Keepalives not set. Setting it to
300 secs

Mar  5 19:32:49 if_init

Mar  5 19:32:49 Skip cleaning pic state on LCC

Mar  5 19:32:49 chassis_alarm_module_init

Mar  5 19:32:49 timer_init

Mar  5 19:32:49 main_snmp_init

Mar  5 19:32:49 snmp_init: snmp_chassis_id = 0, chas_type = 1

Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfe400, or_rows = 23

Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfe800, or_rows = 23

Mar  5 19:32:49 chas_do_registration: or_obj = 0xe04000, or_rows = 23

Mar  5 19:32:49 chas_do_registration: or_obj = 0xd58940, or_rows = 2

Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfec00, or_rows = 23

Mar  5 19:32:49 CHASSISD_SYSCTL_ERROR: ch_srxsme_mgmt_port_mac_init:
hw.re.jseries_fxp_macaddr error from sysctlbyname: File exists (errno
17)

Mar  5 19:32:49 CHASSISD_SYSCTL_ERROR: ch_srxsme_mgmt_port_mac_init:
hw.re.jseries_fxp_macaddr error from sysctlbyname: File exists (errno
17)

Mar  5 19:33:08

Mar  5 19:33:08 trace flags 7f00 trace file /var/log/chassisd size
3000000 cnt 5 no-remote-trace 0

Mar  5 19:33:08 rtsock_init synchronous socket

Mar  5 19:33:08 disabling rtsock public state on sync socket (LCC)

Mar  5 19:33:08 rtsock_init asynchronous socket

Mar  5 19:33:08 disabling rtsock public state on async socket (LCC)

Mar  5 19:33:08 rtsock_init non ifstate async socket

Mar  5 19:33:08 disabling rtsock public state on non ifstate async
socket (LCC)

Mar  5 19:33:08 BCM5910X (bcm5910x_driver_init): Driver initialization
succeeded

Mar  5 19:33:08 POE (ch_poe_srxsme_check_pem_status): POE power good
signal for power supply 1 not asserted

Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 2

Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 4

Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 6

Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 8

Mar  5 19:33:08 POE (ch_srxsme_poe_init): poe init done

Mar  5 19:33:08 parse_configuration ddl

Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Found {chassis,
aggregated-devices}: Object Config action: DAX_ITEM_CHANGED

Mar  5 19:33:08 Walking Object {aggregated-devices,  }

Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Found
{aggregated-devices, ethernet}: Object Config action: DAX_ITEM_CHANGED

Mar  5 19:33:08 Walking Object {ethernet, device-count}

Mar  5 19:33:08 configured aggregated ethernet device count 3

Mar  5 19:33:08 aggregated-device ethernet

Mar  5 19:33:08 configured aggregated ethernet state

Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Did not find
{chassis, cluster}: Object Config action: DAX_ITEM_CHANGED

Mar  5 19:33:08 No routing-options source_routing configuration options
set

Mar  5 19:33:08 protocol-id queue-depth delete-flag

Mar  5 19:33:08 Total Queue Allocation: 0/1024

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 2, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 4, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 6, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 8, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 2, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 4, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 6, max-power 0

Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 8, max-power 0

Mar  5 19:33:08 completed chassis state from ddl

Mar  5 19:33:08 ch_set_non_stop_forwarding_cfg:Setting
non-stop-forwarding to Disabled, source DDL

Mar  5 19:33:08 ch_do_multichassis_overrides:Setting multichassis
replication to Disabled

Mar  5 19:33:08 config_do_overrides: Keepalives not set. Setting it to
300 secs

Mar  5 19:33:08 if_init

Mar  5 19:33:08 Skip cleaning pic state on LCC

Mar  5 19:33:08 chassis_alarm_module_init

Mar  5 19:33:08 timer_init

Mar  5 19:33:08 main_snmp_init

Mar  5 19:33:08 snmp_init: snmp_chassis_id = 0, chas_type = 1

Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfe400, or_rows = 23

Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfe800, or_rows = 23

Mar  5 19:33:08 chas_do_registration: or_obj = 0xe04000, or_rows = 23

Mar  5 19:33:08 chas_do_registration: or_obj = 0xd58940, or_rows = 2

Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfec00, or_rows = 23

Mar  5 19:33:09 hup_init:Hupping init!

Mar  5 19:33:09 JACT_INFO: Created re (h=9) Anti-Counterfeit FSM object

Mar  5 19:33:09  ---cb_reset----re (h=9): reason=SUCCESS (0)

Mar  5 19:33:09 mbus_srxmr_reset_sre_dev: Resetting SRE DEV 5

Mar  5 19:33:09 Resetting anti-counterfeit chip

Mar  5 19:33:09 smb_open, gpiofd 29

Mar  5 19:33:09 initial startup complete

Mar  5 19:33:09 main initialization done....

Mar  5 19:33:09 alarmd connection completed

Mar  5 19:33:09 send: clear all chassis class alarms

Mar  5 19:33:09 craftd connection completed

Mar  5 19:33:13 JACT_INFO:  re (h=9): enter state: HOLD

Mar  5 19:34:13 JACT_INFO:  re: Read public key info...

Mar  5 19:34:13 JACT_INFO:  re: Prepare and send encrypted random
messsage

Mar  5 19:34:13 JACT_INFO:  re (h=9): enter state: DOING

Mar  5 19:36:09 Attempting md comp chunkbuf pool shrink

Mar  5 19:37:18 JACT_INFO:  re: Read and check decrypted  messsage

Mar  5 19:37:18  ---cb_done----re (h=9): auth=passed

Mar  5 19:37:18 re (h=9): AC authentication passed

Mar  5 19:37:18 JACT_INFO:  re (h=9): enter state: PASSED

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Scott T.
Cameron
Sent: Saturday, March 05, 2011 4:46 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] SRX650 Clustering Issue

 

I don't think this is enough information to really help you.

 

What does chassisd log say?

Can you provide a sanitized config?

 

Scott

 

On Sat, Mar 5, 2011 at 8:24 AM, Walaa Abdel razzak <walaaez at bmc.com.sa
<mailto:walaaez at bmc.com.sa> >wrote:

 

> Hi All

> 

> 

> 

> We were connecting two SRX650 to work in Active/passive mode. Before 

> they were having old configuration and once we enabled clustering and 

> rebooted the boxes, they became in hold mode and we get a message of 

> shared violations even after reboot again and no user logged in, any 

> suggestions?

> 

> 

> 

> BR,

> 

> _______________________________________________

> juniper-nsp mailing list juniper-nsp at puck.nether.net
<mailto:juniper-nsp at puck.nether.net>  

> https://puck.nether.net/mailman/listinfo/juniper-nsp
<https://puck.nether.net/mailman/listinfo/juniper-nsp> 

> 

_______________________________________________

juniper-nsp mailing list juniper-nsp at puck.nether.net
<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp
<https://puck.nether.net/mailman/listinfo/juniper-nsp> 



More information about the juniper-nsp mailing list