[j-nsp] SRX650 Clustering Issue

Stefan Fouant sfouant at shortestpathfirst.net
Sat Mar 5 10:00:02 EST 2011 

You need more than just the single command 'set chassis clustering' to get a cluster running.  Did you configure each nodes respective options in the 'groups' stanza? Let's see your configs.

Stefan Fouant

Sent from my iPad

On Mar 5, 2011, at 9:17 AM, "Walaa Abdel razzak" <walaaez at bmc.com.sa> wrote:

> Hi Scott
> 
> 
> 
> The old configuration was test config (very simple) like hostname,
> aggregate ethernet,.....as its fresh FW. After enabling clusterign using
> the standard command set chassis clustering......and reboot, we got the
> following:
> 
> 
> 
> {hold:node0}
> 
> root at -FW1> edit 
> 
> warning: Clustering enabled; using private edit
> 
> error: shared configuration database modified
> 
> Please temporarily use 'configure shared' to commit
> 
> outstanding changes in the shared database, exit,
> 
> and return to configuration mode using 'configure'
> 
> 
> 
> when I issue most commands I got the following:
> 
> 
> 
> {hold:node0}
> 
> root at -FW1> show version 
> 
> error: Could not connect to node0 : No route to host
> 
> 
> 
> The JUNOS version is 10.3.
> 
> 
> 
> Also here is a sample of Chassisd log:
> 
> 
> 
> Mar  5 19:32:49 completed chassis state from ddl
> 
> Mar  5 19:32:49 ch_set_non_stop_forwarding_cfg:Setting
> non-stop-forwarding to Disabled, source DDL
> 
> Mar  5 19:32:49 ch_do_multichassis_overrides:Setting multichassis
> replication to Disabled
> 
> Mar  5 19:32:49 config_do_overrides: Keepalives not set. Setting it to
> 300 secs
> 
> Mar  5 19:32:49 if_init
> 
> Mar  5 19:32:49 Skip cleaning pic state on LCC
> 
> Mar  5 19:32:49 chassis_alarm_module_init
> 
> Mar  5 19:32:49 timer_init
> 
> Mar  5 19:32:49 main_snmp_init
> 
> Mar  5 19:32:49 snmp_init: snmp_chassis_id = 0, chas_type = 1
> 
> Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfe400, or_rows = 23
> 
> Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfe800, or_rows = 23
> 
> Mar  5 19:32:49 chas_do_registration: or_obj = 0xe04000, or_rows = 23
> 
> Mar  5 19:32:49 chas_do_registration: or_obj = 0xd58940, or_rows = 2
> 
> Mar  5 19:32:49 chas_do_registration: or_obj = 0xdfec00, or_rows = 23
> 
> Mar  5 19:32:49 CHASSISD_SYSCTL_ERROR: ch_srxsme_mgmt_port_mac_init:
> hw.re.jseries_fxp_macaddr error from sysctlbyname: File exists (errno
> 17)
> 
> Mar  5 19:32:49 CHASSISD_SYSCTL_ERROR: ch_srxsme_mgmt_port_mac_init:
> hw.re.jseries_fxp_macaddr error from sysctlbyname: File exists (errno
> 17)
> 
> Mar  5 19:33:08
> 
> Mar  5 19:33:08 trace flags 7f00 trace file /var/log/chassisd size
> 3000000 cnt 5 no-remote-trace 0
> 
> Mar  5 19:33:08 rtsock_init synchronous socket
> 
> Mar  5 19:33:08 disabling rtsock public state on sync socket (LCC)
> 
> Mar  5 19:33:08 rtsock_init asynchronous socket
> 
> Mar  5 19:33:08 disabling rtsock public state on async socket (LCC)
> 
> Mar  5 19:33:08 rtsock_init non ifstate async socket
> 
> Mar  5 19:33:08 disabling rtsock public state on non ifstate async
> socket (LCC)
> 
> Mar  5 19:33:08 BCM5910X (bcm5910x_driver_init): Driver initialization
> succeeded
> 
> Mar  5 19:33:08 POE (ch_poe_srxsme_check_pem_status): POE power good
> signal for power supply 1 not asserted
> 
> Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 2
> 
> Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 4
> 
> Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 6
> 
> Mar  5 19:33:08 ch_srxsme_poe_blob_delete: fpc 8
> 
> Mar  5 19:33:08 POE (ch_srxsme_poe_init): poe init done
> 
> Mar  5 19:33:08 parse_configuration ddl
> 
> Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Found {chassis,
> aggregated-devices}: Object Config action: DAX_ITEM_CHANGED
> 
> Mar  5 19:33:08 Walking Object {aggregated-devices,  }
> 
> Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Found
> {aggregated-devices, ethernet}: Object Config action: DAX_ITEM_CHANGED
> 
> Mar  5 19:33:08 Walking Object {ethernet, device-count}
> 
> Mar  5 19:33:08 configured aggregated ethernet device count 3
> 
> Mar  5 19:33:08 aggregated-device ethernet
> 
> Mar  5 19:33:08 configured aggregated ethernet state
> 
> Mar  5 19:33:08 cfg_ddl_chasd_handle_config_option: Did not find
> {chassis, cluster}: Object Config action: DAX_ITEM_CHANGED
> 
> Mar  5 19:33:08 No routing-options source_routing configuration options
> set
> 
> Mar  5 19:33:08 protocol-id queue-depth delete-flag
> 
> Mar  5 19:33:08 Total Queue Allocation: 0/1024
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 2, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 4, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 6, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 8, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 2, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 4, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 6, max-power 0
> 
> Mar  5 19:33:08 POE (poe_handle_maxpower_on_fpc):  FPC 8, max-power 0
> 
> Mar  5 19:33:08 completed chassis state from ddl
> 
> Mar  5 19:33:08 ch_set_non_stop_forwarding_cfg:Setting
> non-stop-forwarding to Disabled, source DDL
> 
> Mar  5 19:33:08 ch_do_multichassis_overrides:Setting multichassis
> replication to Disabled
> 
> Mar  5 19:33:08 config_do_overrides: Keepalives not set. Setting it to
> 300 secs
> 
> Mar  5 19:33:08 if_init
> 
> Mar  5 19:33:08 Skip cleaning pic state on LCC
> 
> Mar  5 19:33:08 chassis_alarm_module_init
> 
> Mar  5 19:33:08 timer_init
> 
> Mar  5 19:33:08 main_snmp_init
> 
> Mar  5 19:33:08 snmp_init: snmp_chassis_id = 0, chas_type = 1
> 
> Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfe400, or_rows = 23
> 
> Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfe800, or_rows = 23
> 
> Mar  5 19:33:08 chas_do_registration: or_obj = 0xe04000, or_rows = 23
> 
> Mar  5 19:33:08 chas_do_registration: or_obj = 0xd58940, or_rows = 2
> 
> Mar  5 19:33:08 chas_do_registration: or_obj = 0xdfec00, or_rows = 23
> 
> Mar  5 19:33:09 hup_init:Hupping init!
> 
> Mar  5 19:33:09 JACT_INFO: Created re (h=9) Anti-Counterfeit FSM object
> 
> Mar  5 19:33:09  ---cb_reset----re (h=9): reason=SUCCESS (0)
> 
> Mar  5 19:33:09 mbus_srxmr_reset_sre_dev: Resetting SRE DEV 5
> 
> Mar  5 19:33:09 Resetting anti-counterfeit chip
> 
> Mar  5 19:33:09 smb_open, gpiofd 29
> 
> Mar  5 19:33:09 initial startup complete
> 
> Mar  5 19:33:09 main initialization done....
> 
> Mar  5 19:33:09 alarmd connection completed
> 
> Mar  5 19:33:09 send: clear all chassis class alarms
> 
> Mar  5 19:33:09 craftd connection completed
> 
> Mar  5 19:33:13 JACT_INFO:  re (h=9): enter state: HOLD
> 
> Mar  5 19:34:13 JACT_INFO:  re: Read public key info...
> 
> Mar  5 19:34:13 JACT_INFO:  re: Prepare and send encrypted random
> messsage
> 
> Mar  5 19:34:13 JACT_INFO:  re (h=9): enter state: DOING
> 
> Mar  5 19:36:09 Attempting md comp chunkbuf pool shrink
> 
> Mar  5 19:37:18 JACT_INFO:  re: Read and check decrypted  messsage
> 
> Mar  5 19:37:18  ---cb_done----re (h=9): auth=passed
> 
> Mar  5 19:37:18 re (h=9): AC authentication passed
> 
> Mar  5 19:37:18 JACT_INFO:  re (h=9): enter state: PASSED
> 
> 
> 
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Scott T.
> Cameron
> Sent: Saturday, March 05, 2011 4:46 PM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] SRX650 Clustering Issue
> 
> 
> 
> I don't think this is enough information to really help you.
> 
> 
> 
> What does chassisd log say?
> 
> Can you provide a sanitized config?
> 
> 
> 
> Scott
> 
> 
> 
> On Sat, Mar 5, 2011 at 8:24 AM, Walaa Abdel razzak <walaaez at bmc.com.sa
> <mailto:walaaez at bmc.com.sa> >wrote:
> 
> 
> 
>> Hi All
> 
>> 
> 
>> 
> 
>> 
> 
>> We were connecting two SRX650 to work in Active/passive mode. Before 
> 
>> they were having old configuration and once we enabled clustering and 
> 
>> rebooted the boxes, they became in hold mode and we get a message of 
> 
>> shared violations even after reboot again and no user logged in, any 
> 
>> suggestions?
> 
>> 
> 
>> 
> 
>> 
> 
>> BR,
> 
>> 
> 
>> _______________________________________________
> 
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> <mailto:juniper-nsp at puck.nether.net>  
> 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> <https://puck.nether.net/mailman/listinfo/juniper-nsp> 
> 
>> 
> 
> _______________________________________________
> 
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> <mailto:juniper-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> <https://puck.nether.net/mailman/listinfo/juniper-nsp> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list