[j-nsp] 2x EX4200 Virtual Chassis Layer2/3 - Which JunOS Version ?

[Dilip Srivastava]

Hi,

You can read release notes

thanks
dilip

On Sat, Feb 19, 2011 at 9:43 PM, Giovanni Bellac <giovannib1979 at ymail.com>wrote:

> Hello all
>
> I have now spend a lot of time to find out the optimal version of JunOS for
> our
> newly ordered 2x EX4200s.
>
> 1) We will run a 2x EX4200 Virtual Chassis.
> 2) We will run BGP default routes (NO full table) and announce our /21.
> 3) We will connect our rack-switches to the Virtual Chassis.
>
> So, we will do Layer2 and some (basic) Layer3.
>
> Should we use the latest service release of 10.0 (= 10.0s11 / 10.0s12) or
> use
> directly 10.4R2.6 ?
>
> My eyes are on 10.0 and 10.4 because these are longer supported releases.
>
> Thank you in advance.
>
> Regards
> Giovanni
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Thanks & Regards

Dilip Kumar Srivastava
Engineer Wipro
9650410022