[j-nsp] Allow BGp loops

[Harry Reynolds]

I think you need to specify tolerance for as path loops at the global/main instance routing options. It will therefore affect all bgp in all instances.

HTHs


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of meryem Z
Sent: Tuesday, March 08, 2011 9:09 AM
Cc: juniper-nsp at puck.nether.net
Subject: [j-nsp] Allow BGp loops


Hello Community ,

on an M320 router running junos 9.6 I had a problem of BGP routes hidden due to BGP loops. So i used the command "set routing-instances <ri> protocols bgp local-as <as> loops 2"

to allow loops.

but then i got the following error message :

'local-as'
Invalid loop count configured
error: configuration check-out
failed

Any idea about this problem?

Thank you.


 		 	   		  
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp