[j-nsp] Allow BGp loops

[Matthew Tighe]

You may need to use the independent domain knob depending on your topology:

http://www.juniper.net/techpubs/en_US/junos10.4/topics/task/configuration/routing-independent-domain-attribute-set-disabling.html


On Tue, Mar 8, 2011 at 9:08 AM, meryem Z <meryem_z at hotmail.com> wrote:

>
> Hello Community ,
>
> on an M320 router running junos 9.6 I had a problem of BGP routes hidden
> due to BGP loops. So i used the command "set routing-instances <ri>
> protocols bgp local-as <as> loops 2"
>
> to allow loops.
>
> but then i got the following error message :
>
> 'local-as'
> Invalid loop count configured
> error: configuration check-out
> failed
>
> Any idea about this problem?
>
> Thank you.
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Matthew Tighe
matthew.e.tighe at gmail.com