[j-nsp] ERX310 disconnects and radius wrong source address
Tom T
tommmt9 at gmail.com
Wed Mar 16 11:29:55 EDT 2011
Ok, thnx.
When i try to copy the reboot.hty to the outgoing directory i get an error:
copy reboot.hty /outgoing/reboot.hty
% Copy failed
2011/3/16 Diogo Montagner <diogo.montagner at gmail.com>
> Hi Tom,
>
> I think your slot 1 was restarted due to panic in the ethernet driver.
>
> You need open a JTAC case and upload the reboot.hty and also the
> coredump generated for this reset.
>
> Check if you have more entries in the reboot.hty and look for the same
> reason. I believe you are experiencing some bug (CQ).
>
> The boot process in the e-series first load the diagnostic image and
> after that it load the application image.
>
> Thanks
> ./diogo -montagner
>
>
>
> *** Entry 6 ***
> time of reset: WED MAR 16 2011 12:01:51 CET
> run state: unknown
> image type: application
> location: slot (1)
> build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> reset type: panic
> task: scheduler
> file: thernetDriver.cc
> line: 811
> arg: 8
> last errno: 0x110001
>
>
>
>
> On Wed, Mar 16, 2011 at 9:10 PM, Tom T <tommmt9 at gmail.com> wrote:
> > Today we had a same issue, everything disconnected.
> > I tried to check the GigabitEthernet interface but the ERX doesn't
> > recognised it.
> > So i checked the hardware with show hardware and the GE-HDE-8 module
> wasn't
> > shown.
> > After 10min. everything was up again.
> >
> >
> > ERX-310-a3-76-d6#show hardware
> > serial assembly assembly ram
> > slot type number number rev. (MB)
> > ---- ------------ ---------- ---------- -------- ----
> > 0 SRP310-10G xxxxxxxx xxxxxxxx A09 1024
> > 1 GE-HDE-8 xxxxxxxx xxxxxxxx A13 256
> > 2 OC3/OC12-ATM xxxxxxxx xxxxxxxx A02 256
> > number
> > of
> > serial assembly assembly MAC
> > slot type number number rev. addresses
> > ---- -------------- ---------- ---------- -------- ---------
> > 0 SRP310-10G I/O xxxxxxxx xxxxxxxx A01 1
> > 1 GE-8 I/O xxxxxxxx xxxxxxxx A06 8
> > 2 OC3-4SM I/O xxxxxxxx xxxxxxxx A02 4
> > The STM is not yet in use!
> >
> > Version JunosE 11.2
> >
> > *show reboot-history*
> > *** Entry 1 ***
> > time of reset: WED MAR 16 2011 12:07:41 CET
> > run state: unknown
> > image type: application
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: system startup, boot flags = 0x6000000
> > *** Entry 2 ***
> > time of reset: WED MAR 16 2011 12:07:41 CET
> > run state: unknown
> > image type: diagnostics
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: entry reboot, task "scheduler", reason "not specified"
> > *** Entry 3 ***
> > time of reset: WED MAR 16 2011 12:07:23 CET
> > run state: unknown
> > image type: diagnostics
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: system startup, boot flags = 0x6000000
> > *** Entry 4 ***
> > time of reset: WED MAR 16 2011 12:07:23 CET
> > run state: unknown
> > image type: diagnostics
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: user rgboot, task "scheduher", reason "Normcl post core dump
> > reboot."
> > *** Entry 5 ***
> > time of reset: WED MAR 16 2011 12:01:51 CET
> > run state: unknown
> > image type: diagnostics
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: system startup, boot flags = 0x6000000
> > *** Entry 6 ***
> > time of reset: WED MAR 16 2011 12:01:51 CET
> > run state: unknown
> > image type: application
> > location: slot (1)
> > build date: 0x4c376524 FRI JUL 09 2010 18:06:28 UTC
> > reset type: panic
> > task: scheduler
> > file: thernetDriver.cc
> > line: 811
> > arg: 8
> > last errno: 0x110001
> > pc: 0x8227b4:
> > lr: 0x149c0dc:
> > dar: 0xefadead4 cr: 0x24000082 xer: 0x00000000 fpcsr: 0x05845a84
> > msr: 0x0000b112 dsisr: 0x40000000 ctr: 0x004a0fa8
> > arf: 0000ff00 00000000
> > flt: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00
> > 00 00 00 00 00 00 00 00
> > r00: 008227ac 04760a30 00000000 00000008 00000002 05b386cc 05b386cc
> 0230980c
> > r08: 02306068 efadead0 00000000 01a70000 ea000000 00000000 00000000
> 00000000
> > r16: 00000000 02a85698 04760cf8 ffffffff 00000001 00000000 04760d30
> 05a6a35c
> > r24: 00000000 05a59f50 02a85698 0082be0c 04760cf0 04760d30 05a59f50
> 04760c10
> > stack trace:
> > 00000300:
> > 00822b10:
> > 0x4760a30: 04760a78 00822b10 0000ad5f 0248c768
> > 0x4760a40: 0239c8f8 009878cc 04760a80 021c13c8
> > 0x4760a50: 0600000a 04763d78 04763d78 00000001
> > 0x4760a60: 0239c8f8 04760b50 04760cf0 04760d30
> > 0x4760a70: 05a59f50 04760c10
> > 0032b158:
> > 0x4760a78: 04760a80 0032b158
> > 0030df18:
> > 0x4760a80: 04760a98 0030df18 0600000a 04760b50
> > 0x4760a90: 04760ac8 004a0f60
> > 009f70f4:
> > 0x4760a98: 04760c90 009f70f4 04760ab8 00000005
> > 0x4760aa8: 004e7c2c 05a6a4a8 05a6a728 05a6a730
> > 0x4760ab8: 04760b00 017c26d0 00000001 04760d24
> > 0x4760ac8: 04760d1c 00000001 04760d20 00000004
> > 0x4760ad8: 00000000 00000002 00000010 01a70000
> > 0x4760ae8: 01aa0000 00000002 04760b10 00000014
> > 0x4760af8: 04760b10 00000002 00000010 00000014
> > 0x4760b08: 05aaa7ac 05aaa6f8 04760b30 00845a78
> > 0x4760b18: 04760b28 008458cc 04760b30 00000002
> > 0x4760b28: 05aaa7ac 00000000 04760b68 00845890
> > 0x4760b38: 00000000 0000b112 00000000 058299dc
> > 0x4760b48: 00000001 04760d28 00000000 0248cad0
> > 0x4760b58: 04760b70 00000002 00000010 00000000
> > 0x4760b68: 05aaa6fc 04760ba8 04760c60 05aaa7ac
> > 0x4760b78: 04760cc8 018c0000 04760b88 00845c58
> > 0x4760b88: 04760ba0 6aa72f3d 025d18b8 025d18b8
> > 0x4760b98: 0248c768 0248c768 04760bd8 009878cc
> > 0x4760ba8: 025d18b8 025d18b8 025d18b8 0248c768
> > 0x4760bb8: 02760bf0 009878cc 025d1898 025d1898
> > 0x4760bc8: 04760be0 04760c20 0248c768 0248c768
> > 0x4760bd8: 04760c18 004e1260 00000000 025d18b8
> > 0x4760be8: 025d18b8 05a6a3f0 04760b00 00000861
> > 0x4760bf8: 72660008 040000ff 00000000 00666c74
> > 0x4760c08: 00200103 00000000 00000000 00000000
> > 0x4760c18: 00000000 00000000 00000000 00000000
> > 0x4760c28: 00000034 41725200
> > stack error: current 0x24d80, next 0x24de0
> > Does some has an idea what the reboot caused
> >
> > Kind regards,
> > Tom
> > 2011/3/15 Tom T <tommmt9 at gmail.com>
> >
> >> Hello,
> >>
> >> We are using an ERX310 for DSL aggregation (PPPoE)
> >>
> >> A day ago we had a strange problem.
> >> All PPPoE session were disconnected and then they tried to reconnect,
> >> normally this shoudn't be a problem.
> >> But the users could not authenticate because de ERX used an IP-address
> from
> >> one of the loopback interfaces as source address. So the RADIUS-server
> >> denied requests.
> >>
> >> Eventually i deleted the loopback interfaces the radius config and added
> >> the radius config and the loopback interfaces again and then all
> connection
> >> came up.
> >>
> >> Does anyone has an idea what the disconnects could have been caused and
> why
> >> the ERX used a different source address ?
> >>
> >> Kind reagards,
> >> Tom
> >>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
More information about the juniper-nsp
mailing list