[j-nsp] 10.0 or 10.4?

Nathan Sipes nathan.sipes at gmail.com
Thu Mar 24 14:28:49 EDT 2011


Has anyone tried running 10.4R3 on a M working as a MPLS-PE? Reason is I am
experiencing an odd issue with an M10i not forwarding CE traffic when I have
two DS-3s installed with equal cost. A/JTAC and my SE have been unable to
figure this out and are pulling a brand C and saying upgrade code and all
your woes will go away.



On Tue, Mar 22, 2011 at 12:18 PM, Richard A Steenbergen <ras at e-gerbil.net>wrote:

> On Tue, Mar 22, 2011 at 05:18:47PM +0100, bas wrote:
> > >From what I read it was; In the field (Ras, Raphael) we see 10.3r3 as
> > the better choice, and people who talk to JTAC say 10.4r2 is the
> > better choice.
>
> Oh and btw, I have multiple confirmed reports of YET ANOTHER major
> memory leak in mib2d in 10.4R2. Hope everyone learned their lesson about
> trusting JTAC version recommendations. :)
>
> From 10.4R3 release notes:
>
> The mib2d process leaks memory during SNMP walks. [PR/586074: This issue
> has been resolved.]
>
> I'm going to assume it's that. :)
>
> --
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list