[j-nsp] QinQ & port mode access

[Bjørn Tore Paulen]

Den 29.03.2011 21:06, skrev Mohammad Salbad:
> Hi All
>
>
>
> As per the dot1q tunneling standard the interface facing the customer device
> should be in access mode, but I'm wondering if there is any work around that
> I can do to overcome this. i.e. to configure the port facing the customer
> device in trunk mode and still have the Q in Q functioning.
>
> The issue is I have EX4200 switch that is connected to wireless device and
> this wireless device connecting multiple customers in appoint to multipoint
> setup, and I'm segregating between customers using dot1q vlan tagging, so if
> I have a customer who wants to carry multiple vlans between his sites then I
> can't configure the port that is facing the wireless device to port mode
> access because all other customers will be down.
>
Hi,

Would 'customer-vlans' meet your requirements?
http://www.juniper.net/techpubs/en_US/junos10.4/topics/concept/qinq-tunneling-ex-series.html#jd0e101

-- 

   Bjørn Tore