[j-nsp] SSH/Telnet session hanging

[Muhammad Adnan Mohsin]

Hi Experts,
I have a MX240 router installed at a remote location. I am able to
telnet/SSH the router but when I run a command that needs to return a
large output (e.g. show log messages or show conf) the session hangs
and then I have to re-establish the connection. Because of this I
couldn't provide some outputs that were required by JTAC. As long as
the commands I give on the router don't have to return a large output,
the session remains intact. The current code that I am running is
10.2R3.10. JTAC has recommended me to install 10.3R2 but I have a
feeling that won't work. Has somebody experience a similar issue? I
would appreciate if somebody could give me some guidance to
troubleshoot this problem.

thanks.
Adnan.