[j-nsp] SSH/Telnet session hanging

[Burkhard Ott]

On Tue, 31 May 2011 23:18:34 +0300
Muhammad Adnan Mohsin <adnanm at gmail.com> wrote:

> Hi Experts,
> I have a MX240 router installed at a remote location. I am able to
> telnet/SSH the router but when I run a command that needs to return a
> large output (e.g. show log messages or show conf) the session hangs
> and then I have to re-establish the connection. Because of this I
> couldn't provide some outputs that were required by JTAC. As long as
> the commands I give on the router don't have to return a large output,
> the session remains intact. The current code that I am running is
> 10.2R3.10. JTAC has recommended me to install 10.3R2 but I have a
> feeling that won't work. Has somebody experience a similar issue? I
> would appreciate if somebody could give me some guidance to
> troubleshoot this problem.

Sounds like your mtu value.
 
-- 
Burkhard Ott
System Administrator
Revenuewire Inc.
1205 - 4464 Markham Street
Victoria, BC V8Z 7X8
250-984-1132 ext. 7132