[j-nsp] aggregate interface get down

[Robert Juric]

How about some output from "show interface ae4 detail" as well as the
member interfaces when the ae goes down? By your configuration the ae
interface should remain up as long as a single interface is still up.

Robert

On Wed, Nov 23, 2011 at 3:00 AM, hani ibrahim
<hani.ibrahim.aswn at gmail.com>wrote:

> Dear All,
>
> kindly i need you help in one  problem  with an aggregate interface , it
> went  down when any of its interfaces went down below is my configuration :
>
> MX480-Router> show configuration interfaces ge-0/2/6
> gigether-options {
>    802.3ad ae4;
> }
>
> MX480-Router> show configuration interfaces ge-0/2/7
> gigether-options {
>    802.3ad ae4;
> }
> MX480-Router> show configuration interfaces ae4
> vlan-tagging;
> aggregated-ether-options {
>    minimum-links 1;
>    link-speed 1g;
>
> unit 5 {
>    vlan-id 5;
>    family inet {
>              address 10.10.10.1/31;
>    }
>
> M320-Router> show configuration interfaces ge-0/2/6
> gigether-options {
>    802.3ad ae4;
> }
>
> M320-Router> show configuration interfaces ge-0/2/7
> gigether-options {
>    802.3ad ae4;
> }
> M320-Router> show configuration interfaces ae4
> vlan-tagging;
> aggregated-ether-options {
>    minimum-links 1;
>    link-speed 1g;
>
> unit 5 {
>    vlan-id 5;
>    family inet {
>              address 10.10.10.2/31;
>    }
>
> BR,
> Hany
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>