[j-nsp] aggregate interface get down

[Per Granath]

Hi,

Try running LACP too:

	set interfaces ae4 aggregated-ether-options lacp active

Regards,
Per

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of hani ibrahim
Sent: 23 November 2011 11:01
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] aggregate interface get down

Dear All,

kindly i need you help in one  problem  with an aggregate interface , it went  down when any of its interfaces went down below is my configuration :

MX480-Router> show configuration interfaces ge-0/2/6
gigether-options {
    802.3ad ae4;
}

MX480-Router> show configuration interfaces ge-0/2/7
gigether-options {
    802.3ad ae4;
}
MX480-Router> show configuration interfaces ae4
vlan-tagging;
aggregated-ether-options {
    minimum-links 1;
    link-speed 1g;

unit 5 {
    vlan-id 5;
    family inet {
              address 10.10.10.1/31;
    }

M320-Router> show configuration interfaces ge-0/2/6
gigether-options {
    802.3ad ae4;
}

M320-Router> show configuration interfaces ge-0/2/7
gigether-options {
    802.3ad ae4;
}
M320-Router> show configuration interfaces ae4
vlan-tagging;
aggregated-ether-options {
    minimum-links 1;
    link-speed 1g;

unit 5 {
    vlan-id 5;
    family inet {
              address 10.10.10.2/31;
    }

BR,
Hany
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp