[j-nsp] End host mapping tool

[Phil Mayers]

On 11/28/2011 02:15 AM, Dale Shaw wrote:
> Hi all,
>
> Is anyone aware of open source or COTS software that provides MAC
> address to switch port to IP address (and vice versa) mapping and
> discovery? aka end user / end station tracking.
>
> There are lots of them out there ('netdisco' being a popular open
> source choice) but I haven't stumbled across one yet that properly
> understands Juniper (JUNOS) bridging MIB(s) supported on EX-series
> such that the MAC/L2 to IP/L3 resolution works properly.

I'm surprised Netdisco doesn't work. Does JunOS not support ipNetToMedia 
in that configuration or something? We use a home-grown system that 
polls that very table, and it works fine on our J-Series.