[j-nsp] How can change the OSPF backbone area number other 0?

[Mark Tinka]

On Monday, September 12, 2011 10:27:16 PM Paulhamus, Jon 
wrote:

> If the design is that bad - use virtual-links.   Usually
> there are not any good reasons to do so.  Area 0 must be
> the backbone, must be contiguous, and all other areas
> should connect to it.

I've equally found that if you need to use virtual links to 
extend Area 0, you probably want to go with IS-IS anyway. 
Virtual links work, but they just add unneeded complexity.

But that's just my view :-).

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110920/a3cf4dc9/attachment.pgp>