[j-nsp] How can change the OSPF backbone area number other 0?

[Paulhamus, Jon]

If the design is that bad - use virtual-links.   Usually there are not any good reasons to do so.  Area 0 must be the backbone, must be contiguous, and all other areas should connect to it.


________________________________________
From: medrees [medrees at isu.net.sa]
Sent: Monday, September 12, 2011 4:19 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] How can change the OSPF backbone area number other 0?

Dear Experts



          I'm confusing why all vendors chooses OSPF backbone area to be
area 0 and I'm asking if there is method to change this number to any other
to be configured in all routers within the network?





Thanks,

Best Regards,

Mohamed Edrees

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp