[j-nsp] SRX recommended software

[Brent Jones]

On Mon, Apr 2, 2012 at 2:24 PM, Jeff Rooney <jtrooney at nexdlevel.com> wrote:

> I have a few SRX650's that are running 10.4R9.2 per the Juniper recommended
> release page
> http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476
> However,
> I just have a few more which came with 11.2R4.3 on them. Just curious as to
> what everyone is running on these, should I downgrade the new guys? or
> upgrade old?
>
> The workload on these boxes is nothing crazy, some IPSEC vpn, OSPF with
> about 200 routes, firewalling, no cluster...etc.
>
> Thanks for any input.
>
> Jeff
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

I still run 11.1R3.5 on several sets of SRX1400s.
Then on branch units, I chose to stick with 10.4R6.5

I have to say, no major issues uncovered so far, same stuff as you, IPSec,
VPNs, OSPF...

-- 
Brent Jones
brent at brentrjones.com