[j-nsp] SRX recommended software

[Paul Stewart]

We're pretty much on 10.4R8.5 back to 6.5 on most boxes.. no major issues.
I think we have a couple of boxes on 11.2 code due to features required that
weren't present in 10.4 tree.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Brent Jones
Sent: Monday, April 02, 2012 5:41 PM
To: Jeff Rooney
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] SRX recommended software

On Mon, Apr 2, 2012 at 2:24 PM, Jeff Rooney <jtrooney at nexdlevel.com> wrote:

> I have a few SRX650's that are running 10.4R9.2 per the Juniper 
> recommended release page
> http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476
> However,
> I just have a few more which came with 11.2R4.3 on them. Just curious 
> as to what everyone is running on these, should I downgrade the new 
> guys? or upgrade old?
>
> The workload on these boxes is nothing crazy, some IPSEC vpn, OSPF 
> with about 200 routes, firewalling, no cluster...etc.
>
> Thanks for any input.
>
> Jeff
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

I still run 11.1R3.5 on several sets of SRX1400s.
Then on branch units, I chose to stick with 10.4R6.5

I have to say, no major issues uncovered so far, same stuff as you, IPSec,
VPNs, OSPF...

--
Brent Jones
brent at brentrjones.com
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp