[j-nsp] Layer 2 feature on srx

[bruno]

hello expert,
i use two srx210h to test some Layer 2 networking features on MX Series routers. the topo is very simple 
PC1---SRX1----SRX2----PC2.  the link in srx1---srx2 is set to trunk mode. PC1 and PC2 is belong to vlan 100.  PC1 can't ping PC2. 


interfaces {
    ge-0/0/1 {
        description TO-SRX2;
        vlan-tagging;
        unit 0 {
            family bridge {
                interface-mode trunk;
                vlan-id-list [ 100 200 ];
            }
        }
    }                                   
    fe-0/0/4 {
        unit 0 {
            family bridge {
                interface-mode access;
                vlan-id 100;
            }
        }
    }
    irb {
        unit 100 {
            description "GW For VLAN 100";
            family inet {
                address 100.1.1.254/24;
            }
        }
        unit 200 {
            description "GW For VLAN 200";
            family inet {
                address 200.1.1.254/24;
            }
        }
    }
}                                       
security {
    forwarding-options {
        family {
            mpls {
                mode packet-based;
            }
        }
    }
}
bridge-domains {
    vlan_100 {
        vlan-id 100;
        routing-interface irb.100;
    }
    vlan_200 {
        vlan-id 200;
        routing-interface irb.200;
    }
}



------------------
Best Regards,
Bruno