[j-nsp] Layer 2 feature on srx

[ashish verma]

Are you missing zones/policies since it is SRX?

On Mon, Apr 9, 2012 at 7:05 PM, bruno <bruno.juniper at gmail.com> wrote:

> hello expert,
> i use two srx210h to test some Layer 2 networking features on MX Series
> routers. the topo is very simple
> PC1---SRX1----SRX2----PC2.  the link in srx1---srx2 is set to trunk mode.
> PC1 and PC2 is belong to vlan 100.  PC1 can't ping PC2.
>
>
> interfaces {
>    ge-0/0/1 {
>        description TO-SRX2;
>        vlan-tagging;
>        unit 0 {
>            family bridge {
>                interface-mode trunk;
>                vlan-id-list [ 100 200 ];
>            }
>        }
>    }
>    fe-0/0/4 {
>        unit 0 {
>            family bridge {
>                interface-mode access;
>                vlan-id 100;
>            }
>        }
>    }
>    irb {
>        unit 100 {
>            description "GW For VLAN 100";
>            family inet {
>                address 100.1.1.254/24;
>            }
>        }
>        unit 200 {
>            description "GW For VLAN 200";
>            family inet {
>                address 200.1.1.254/24;
>            }
>        }
>    }
> }
> security {
>    forwarding-options {
>        family {
>            mpls {
>                mode packet-based;
>            }
>        }
>    }
> }
> bridge-domains {
>    vlan_100 {
>        vlan-id 100;
>        routing-interface irb.100;
>    }
>    vlan_200 {
>        vlan-id 200;
>        routing-interface irb.200;
>    }
> }
>
>
>
> ------------------
> Best Regards,
> Bruno
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>